DROP-IN® anchors are internally threaded, deformation controlled expansion anchors with a pre-assembled expander plug, suitable for flush mount applications in solid base materials. The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool.

DROP-IN® anchors are internally threaded, deformation controlled expansion anchors with a pre-assembled expander plug, suitable for flush mount applications in solid base materials. The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool.

DROP-IN® anchors are internally threaded, deformation controlled expansion anchors with a pre-assembled expander plug, suitable for flush mount applications in solid base materials.  The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool.

SLEEVE-ALL® sleeve anchors are pre-assembled expanding sleeve anchors for use in all types of solid base materials.

WEDGE-ALL® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied. The threaded stud version is available in eight diameters and multiple lengths. A single size tie-wire version is available for wire supported fixtures. Threaded studs are set by tightening the nut.

Zinc NAILON™ anchors are low cost anchors for light-duty applications under static loads. The zinc body consists of a die cast zinc alloy. The carbon steel pin and mushroom head configuration make this anchor tamper resistant.

Nylon NAILON™ anchors are low cost anchors for light-duty applications under static loads. The nylon shell acts as an insulator when used in electrical applications. The cold-rolled steel pin and mushroom head configuration make this anchor tamper resistant.

WEDGE-ALL® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied. The threaded stud version is available in eight diameters and multiple lengths. A single size tie-wire version is available for wire supported fixtures. Threaded studs are set by tightening the nut.

Drop-in anchors are internally-threaded, deformation-controlled expansion anchors with a preassembled expander plug, suitable for flush mount applications in solid base materials. The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool. Drop-in anchors are also available in coil-threaded versions for 1/2 inch and 3/4 inch coil threaded rod. The Lipped Drop-In (DIAL) features a lip at the top of the anchor body that keeps the top of the anchor flush with the concrete. This eliminates the need for precisely drilled hole depths and allows for easier flush installation, consistent embedment and uniform rod lengths. The Short Drop-In Anchor (DIAS) is for use in solid and hollow concrete. The short length enables shallow embedment that helps avoid drilling into rebar or prestressing strands. The wide surface flange allows the DIAS to be installed in deep or bottomless holes.

The Split Drive Anchor is a one-piece anchor with a split-type expansion mechanism on the working end. As the anchor is driven into the hole, the expansion mechanism compresses and exerts force against the walls of the hole. This anchor can be installed in concrete, grout-filled block and stone. Made of heat-treated carbon steel and available in both zinc plated and mechanically galvanized finishes.

The Split Drive Anchor is a one-piece anchor with a split-type expansion mechanism on the working end. As the anchor is driven into the hole, the expansion mechanism compresses and exerts force against the walls of the hole. This anchor can be installed in concrete, grout-filled block and stone. Made of heat-treated carbon steel and available in both zinc plated and mechanically galvanized finishes.

SLEEVE-ALL® sleeve anchors are pre-assembled expanding sleeve anchors for use in all types of solid base materials.

SLEEVE-ALL® sleeve anchors are pre-assembled expanding sleeve anchors for use in all types of solid base materials.

The Spring Wing Toggle Bolt is designed for installation in hollow wall construction consisting of base materials such as gypsum wallboard and ungrouted concrete masonry units. The Spring Wing Toggle provides a large bearing area to distribute the applied loads. The Spring Wing Toggle Bolt comes complete with Spring Wing Toggle and machine screw (combo phillips and slot head).

Category 1 anchor classification: The Strong-Bolt 2 anchor received classification as a Category 1 anchor, which is established by performance in reliability tests in accordance with AC193 and ACI355.2 test criteria. Category 1 is the highest attainable anchor category for reliability. Tri-segmented clip: Each segment adjusts independently, increasing follow-up expansion should the hole increase in size as a result of a crack. Dual embossments on each clip segment: Enables clip to undercut into the concrete thereby increasing follow-up expansion should a crack occur. The 3/8" anchor solution approved for 3 ¼" concrete thickness: The Strong-Bolt 2 anchor can be installed in cracked concrete with a minimum thickness of 3 ¼", including concrete-over-metal decking. High-strength alloy clip on carbon-steel anchors: This special alloy clip offers improved performance.
Standard (ANSI) fractional anchor: Fits most fixtures and installs with common drill bit sizes and tools. Type 316 stainless-steel clip on stainless steel anchors: In addition to superior corrosion resistance, a stainless-steel clip offers "memory" that contributes to the anchor's performance if the hole increases in size because of a crack.

Category 1 anchor classification: The Strong-Bolt 2 anchor received classification as a Category 1 anchor, which is established by performance in reliability tests in accordance with AC193 and ACI355.2 test criteria. Category 1 is the highest attainable anchor category for reliability. Tri-segmented clip: Each segment adjusts independently, increasing follow-up expansion should the hole increase in size as a result of a crack. Dual embossments on each clip segment: Enables clip to undercut into the concrete thereby increasing follow-up expansion should a crack occur. The 3/8" anchor solution approved for 3 ¼" concrete thickness: The Strong-Bolt 2 anchor can be installed in cracked concrete with a minimum thickness of 3 ¼", including concrete-over-metal decking. High-strength alloy clip on carbon-steel anchors: This special alloy clip offers improved performance.
Standard (ANSI) fractional anchor: Fits most fixtures and installs with common drill bit sizes and tools. Type 316 stainless-steel clip on stainless steel anchors: In addition to superior corrosion resistance, a stainless-steel clip offers "memory" that contributes to the anchor's performance if the hole increases in size because of a crack.