The Split Drive Anchor is a one-piece anchor with a split-type expansion mechanism on the working end. As the anchor is driven into the hole, the expansion mechanism compresses and exerts force against the walls of the hole. This anchor can be installed in concrete, grout-filled block and stone. Made of heat-treated carbon steel and available in both zinc plated and mechanically galvanized finishes.

SLEEVE-ALL® sleeve anchors are pre-assembled expanding sleeve anchors for use in all types of solid base materials.

SLEEVE-ALL® sleeve anchors are pre-assembled expanding sleeve anchors for use in all types of solid base materials.

The Spring Wing Toggle Bolt is designed for installation in hollow wall construction consisting of base materials such as gypsum wallboard and ungrouted concrete masonry units. The Spring Wing Toggle provides a large bearing area to distribute the applied loads. The Spring Wing Toggle Bolt comes complete with Spring Wing Toggle and machine screw (combo phillips and slot head).

Category 1 anchor classification: The Strong-Bolt 2 anchor received classification as a Category 1 anchor, which is established by performance in reliability tests in accordance with AC193 and ACI355.2 test criteria. Category 1 is the highest attainable anchor category for reliability. Tri-segmented clip: Each segment adjusts independently, increasing follow-up expansion should the hole increase in size as a result of a crack. Dual embossments on each clip segment: Enables clip to undercut into the concrete thereby increasing follow-up expansion should a crack occur. The 3/8" anchor solution approved for 3 ¼" concrete thickness: The Strong-Bolt 2 anchor can be installed in cracked concrete with a minimum thickness of 3 ¼", including concrete-over-metal decking. High-strength alloy clip on carbon-steel anchors: This special alloy clip offers improved performance.
Standard (ANSI) fractional anchor: Fits most fixtures and installs with common drill bit sizes and tools. Type 316 stainless-steel clip on stainless steel anchors: In addition to superior corrosion resistance, a stainless-steel clip offers "memory" that contributes to the anchor's performance if the hole increases in size because of a crack.

Category 1 anchor classification: The Strong-Bolt 2 anchor received classification as a Category 1 anchor, which is established by performance in reliability tests in accordance with AC193 and ACI355.2 test criteria. Category 1 is the highest attainable anchor category for reliability. Tri-segmented clip: Each segment adjusts independently, increasing follow-up expansion should the hole increase in size as a result of a crack. Dual embossments on each clip segment: Enables clip to undercut into the concrete thereby increasing follow-up expansion should a crack occur. The 3/8" anchor solution approved for 3 ¼" concrete thickness: The Strong-Bolt 2 anchor can be installed in cracked concrete with a minimum thickness of 3 ¼", including concrete-over-metal decking. High-strength alloy clip on carbon-steel anchors: This special alloy clip offers improved performance.
Standard (ANSI) fractional anchor: Fits most fixtures and installs with common drill bit sizes and tools. Type 316 stainless-steel clip on stainless steel anchors: In addition to superior corrosion resistance, a stainless-steel clip offers "memory" that contributes to the anchor's performance if the hole increases in size because of a crack.