Quick Order

Enter Items Below

ITEM#
Results 1-10 of 1812

  • Strong Drive SDWS Timber Screws
      
      
     

    Strong-Drive® SDW EWP-PLY Screw

    Multi-Ply Wood Members, Engineered-Lumber Products and Solid-Sawn Lumber, Black E-Coat 
    Click For More
    The Strong-Drive® SDW EWP-Ply screw is a high-strength structural wood screw specifically designed for fastening multi-ply wood members,
    such as engineered-wood products and solid-sawn lumber. The SDW EWP-Ply installs easily with no pre-drilling and is available in optimized lengths
    for fastening 1 3⁄4" engineered lumber, such as structural composite lumber (SCL). The large, flush head eases the handling of assembled girders and simplifies the installation of finishes or structural connectors.
  • Wedge Anchor
      
      
     

    STRONG-BOLT® 2 Wedge Anchors 316 Stainless Steel

    STRONG-BOLT® 2 Wedge Anchors for Cracked and Uncracked Concrete, 316 Stainless Steel 
    Click For More
    Category 1 anchor classification: The Strong-Bolt 2 anchor received classification as a Category 1 anchor, which is established by performance in reliability tests in accordance with AC193 and ACI355.2 test criteria. Category 1 is the highest attainable anchor category for reliability. Tri-segmented clip: Each segment adjusts independently, increasing follow-up expansion should the hole increase in size as a result of a crack. Dual embossments on each clip segment: Enables clip to undercut into the concrete thereby increasing follow-up expansion should a crack occur. The 3/8" anchor solution approved for 3 ¼" concrete thickness: The Strong-Bolt 2 anchor can be installed in cracked concrete with a minimum thickness of 3 ¼", including concrete-over-metal decking. High-strength alloy clip on carbon-steel anchors: This special alloy clip offers improved performance.
    Standard (ANSI) fractional anchor: Fits most fixtures and installs with common drill bit sizes and tools. Type 316 stainless-steel clip on stainless steel anchors: In addition to superior corrosion resistance, a stainless-steel clip offers "memory" that contributes to the anchor's performance if the hole increases in size because of a crack.
  • Terms and Conditions

     
    Click For More
    [Error processing dynamic tag getCurrentAttribute('item','custitem_text_detailed_description') : record infoitem 24 not found]
  • Grade 5 Hex Cap Screw
      
      
      
     

    Grade 5 Hex Cap Screws Zinc - Domestic USA

    SAE J429 Grade 5, Made in the USA 
    Click For More
    Grade 5 Hex Cap Screws are manufactured in the USA from medium carbon steel. Our Grade 5 material meets or exceeds SAE J429 Grade 5 specifications. All products are manufactured with rolled threads. Typical hardness on diameters 1/4 to 1 inch is HRC 25-34. On diameters over 1 inch to 1 1/2 hardness will range from HRC 19-30. Tensile strength for diameters 1/4 to 1 inch is a minimum of 120,000 psi and for diameters over 1 inch to 1 1/2, 105,000 psi.
  • ASTM and SAE Specifications

     
    Click For More
    [Error processing dynamic tag getCurrentAttribute('item','custitem_text_detailed_description') : record infoitem 18 not found]
  • Strong Drive SDWS Timber Screws
      
      
     

    Strong-Drive® SDW Truss-Ply Screw - Desert

    Truss-Ply Fastening, Black E-Coat, Specifically for Desert Environments 
    Click For More
    The Strong-Drive® SDW Truss-Ply screw is a high-strength structural wood screw specifically designed for fastening multi-ply wood members, such as joining plated trusses and solid-sawn lumber. The SDW installs easily with no pre-drilling and is available in optimized lengths for fastening 2-, 3- and 4-ply trusses. With the SDW Truss-Ply screw, multi-ply trusses and beams can be fastened from one side without requiring the lifting and flipping of heavy assemblies.
  • Phillips Flat Undercut Machine Screw
      
      
     

    Phillips Flat Undercut Machine Screws Black Zinc

    Black Zinc 
    Click For More
    Black Zinc is an acidic, low temperature powdered product developed to impart a black conversion coating of zinc die casting, galvanized stock and electroplated zinc parts. The black coating serves as a base for organic coatings (lacquers, paints, waxes and oils) and also provides an esthetic appeal.
  • Strong Drive SDWS Timber Screws
      
      
     

    Strong-Drive® SDW Truss-Ply Screw

    Truss-Ply Fastening, Black E-Coat 
    Click For More
    The Strong-Drive® SDW Truss-Ply screw is a high-strength structural wood screw specifically designed for fastening multi-ply wood members, such as joining plated trusses and solid-sawn lumber. The SDW installs easily with no pre-drilling and is available in optimized lengths for fastening 2-, 3- and 4-ply trusses. With the SDW Truss-Ply screw, multi-ply trusses and beams can be fastened from one side without requiring the lifting and flipping of heavy assemblies.
  • ThruLOK® Screw Bolt Fastening Systems
      
      
     

    ThruLOK® Screw Bolt Fastening Systems

    ThruLOK® Screw Bolt Fastening Systems 
    Click For More
    ThruLOK® is the newest edition to the FastenMaster LOK Line of structural wood-to-wood fasteners. ThruLOK® offers the speed of a LOK Line product and the strength of a through-bolted connection. ThruLOK® is a three-part assembly including a ThruLOK® fastener featuring the patent-pending Paddle Point, engineered washer and LOK-Nut.
  • Grade 5 Hex Cap Screw
      
      
     

    Grade 5 Hex Cap Screws Zinc

    SAE J429 Grade 5 
    Click For More
    Grade 5 Hex Cap Screws are manufactured from medium carbon steel. Our Grade 5 material meets or exceeds SAE J429 Grade 5 specifications. All products are manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters 1/4 to 1 inch is HRC 25-34. On diameters over 1 inch to 1 1/2 hardness will range from HRC 19-30. Tensile strength for diameters 1/4 to 1 inch is a minimum of 120,000 psi and for diameters over 1 inch to 1 1/2, 105,000 psi.
Results 1-10 of 1812