Shopping Cart 0 Items - $0.00
Quick Order

Enter Items Below

ITEM#

Stainless Wood Screws

  •   
      
     

    Phillips Flat Wood Screws 18-8 Stainless Steel

    18% Chromium, 8% Nickel - Flat Head for Countersinking 
    Click For More
    Stainless steel wood screws are tapered along the threaded portion of the shank for optimal holding power in wood. A smooth partial shank or shoulder helps prevent splitting and allows the screw to pull the two pieces of wood together for a tight fitting connection or joint. The stainless steel material is also compatible with ACQ treated lumber.
  •   
      
     

    Philips Modified Truss Wood Screws K-Lath T17 305 Stainless Steel

    #8 Diameter, Type 17 Tip, 305 Stainless Steel 
    Click For More
    For use in applications where a larger bearing surface is needed underneath the head. Used to fasten lath to wood. Type-17 point for fast starts. #2 Phillips drive.
  •   
      
      
     

    Hex Washer Head Timber Tamers™ Wood Screws 316 Stainless Steel

    5/16 and 1/2 Hex Drive, 316 Stainless Steel 
    Click For More
    For superior corrosion resistance in a range of applications including timber framing, pole barn construction, log homes, gutter installation and landscape timbers. Available in screw sizes 1/4 " and 3 ⁄ 8 " and lengths from 3 to 12 inches . 4-corner thread form significantly reduces driving torque. Drive with standard 5/16 " or 1/2 " hex nut drivers. Specify Timber Tamers ™ for outdoor construction projects requiring longer length screws.
  •   
      
      
     

    Philips Flat Sharx™ Wood Screws 316 Stainless Steel

    Hi-Lo Threads, Sharp Point, 316 Stainless Steel 
    Click For More
    Sharx ™ screws bite and hold fast in fiberglass, plywood and wood substitute materials. Use for projects exposed to harsh marine or many chemically caustic conditions. Ideal for applying trim, rub rail and molding to fiberglass boat hulls. Extra-sharp points speed screw starts during assembly. Specially engineered, high/low thread form incorporates indentations (“teeth”) that cut easily and quickly through high-density materials. Back-out resistance: once driven home, Sharx ™; are locked in place thanks to their “teeth” (the thread indentations will resist back-out even after prolonged vibration). Holding power: Pull-out values of Sharx ™; ;screws exceed those of ordinary tapping screws in fiberglass and wood. Screws up to 1" in length are fully threaded. Screws more than 1" long are threaded 2/3; of the shank length. Phillips drive.
  •   
      
      
     

    Philips Pan Sharx™ Wood Screws 316 Stainless Steel

    Hi-Lo Threads, Sharp Point, 316 Stainless Steel 
    Click For More
    Sharx ™ screws bite and hold fast in fiberglass, plywood and wood substitute materials. Use for projects exposed to harsh marine or many chemically caustic conditions. Ideal for applying trim, rub rail and molding to fiberglass boat hulls. Extra-sharp points speed screw starts during assembly. Specially engineered, high/low thread form incorporates indentations (“teeth”) that cut easily and quickly through high-density materials. Back-out resistance: once driven home, Sharx ™; are locked in place thanks to their “teeth” (the thread indentations will resist back-out even after prolonged vibration). Holding power: Pull-out values of Sharx ™; ;screws exceed those of ordinary tapping screws in fiberglass and wood. Screws up to 1" in length are fully threaded. Screws more than 1" long are threaded 2/3; of the shank length. Phillips drive.
  •   
      
      
     

    Philips Oval Sharx™ Wood Screws 316 Stainless Steel

    316 Stainless Steel, Type 17 Tip 
    Click For More
    Type-17 point for fast starts. Coarse threads approximately 2/3; up the shank draw board tightly to the substrate. Pre-drilling recommended near board ends to prevent splitting. Use with stable woods and wood substitutes when screw heads need to be hidden. #7 screw has 0.230" head diameter and #1 square drive recess. #9 x 3 1/2 " screw has 0.250" head diameter and #1 square drive recess. #9 x4" screw has 0.250" head diameter and #2 square drive recess. Choose type 316 for seaside applications and superior corrosion resistance.