Quick Order

Enter Items Below

ITEM#

Wedge Anchors

  • Wedge Anchor
      
      
      
     

    Simpson WEDGE-ALL® Wedge Anchors

    WEDGE-ALL® Wedge Anchors 
    Click For More
    WEDGE-ALL® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied. The threaded stud version is available in eight diameters and multiple lengths. A single size tie-wire version is available for wire supported fixtures. Threaded studs are set by tightening the nut.
  • Wedge Anchor
      
      
     

    STRONG-BOLT® 2 Wedge Anchors Zinc

    STRONG-BOLT® 2 Wedge Anchors for Cracked and Uncracked Concrete 
    Click For More
    Category 1 anchor classification: The Strong-Bolt 2 anchor received classification as a Category 1 anchor, which is established by performance in reliability tests in accordance with AC193 and ACI355.2 test criteria. Category 1 is the highest attainable anchor category for reliability. Tri-segmented clip: Each segment adjusts independently, increasing follow-up expansion should the hole increase in size as a result of a crack. Dual embossments on each clip segment: Enables clip to undercut into the concrete thereby increasing follow-up expansion should a crack occur. The 3/8" anchor solution approved for 3 ¼" concrete thickness: The Strong-Bolt 2 anchor can be installed in cracked concrete with a minimum thickness of 3 ¼", including concrete-over-metal decking. High-strength alloy clip on carbon-steel anchors: This special alloy clip offers improved performance.
    Standard (ANSI) fractional anchor: Fits most fixtures and installs with common drill bit sizes and tools. Type 316 stainless-steel clip on stainless steel anchors: In addition to superior corrosion resistance, a stainless-steel clip offers "memory" that contributes to the anchor's performance if the hole increases in size because of a crack.
  • Wedge Anchor
      
      
     

    Simpson WEDGE-ALL® Wedge Anchors 303/304 Stainless Steel

    WEDGE-ALL® Wedge Anchors in 303/304 Stainless Steel 
    Click For More
    WEDGE-ALL® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied. The threaded stud version is available in eight diameters and multiple lengths. A single size tie-wire version is available for wire supported fixtures. Threaded studs are set by tightening the nut.
  • Wedge Anchor
      
      
     

    Simpson WEDGE-ALL® Wedge Anchors 316 Stainless Steel

    WEDGE-ALL® Wedge Anchors, 316 Stainless Steel 
    Click For More
    WEDGE-ALL® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied. The threaded stud version is available in eight diameters and multiple lengths. A single size tie-wire version is available for wire supported fixtures. Threaded studs are set by tightening the nut.
  • Wedge Anchor
      
      
     

    STRONG-BOLT® 2 Wedge Anchors 316 Stainless Steel

    STRONG-BOLT® 2 Wedge Anchors for Cracked and Uncracked Concrete, 316 Stainless Steel 
    Click For More
    Category 1 anchor classification: The Strong-Bolt 2 anchor received classification as a Category 1 anchor, which is established by performance in reliability tests in accordance with AC193 and ACI355.2 test criteria. Category 1 is the highest attainable anchor category for reliability. Tri-segmented clip: Each segment adjusts independently, increasing follow-up expansion should the hole increase in size as a result of a crack. Dual embossments on each clip segment: Enables clip to undercut into the concrete thereby increasing follow-up expansion should a crack occur. The 3/8" anchor solution approved for 3 ¼" concrete thickness: The Strong-Bolt 2 anchor can be installed in cracked concrete with a minimum thickness of 3 ¼", including concrete-over-metal decking. High-strength alloy clip on carbon-steel anchors: This special alloy clip offers improved performance.
    Standard (ANSI) fractional anchor: Fits most fixtures and installs with common drill bit sizes and tools. Type 316 stainless-steel clip on stainless steel anchors: In addition to superior corrosion resistance, a stainless-steel clip offers "memory" that contributes to the anchor's performance if the hole increases in size because of a crack.
  •