Grade 5 Carriage Bolts

Grade 5 Carriage Bolts


  • Product Description
  • Related Products
Carriage Bolt
  
  
  
 
List

Grade 5 Carriage Bolts

Grade 5 Carriage Bolts are manufactured from medium carbon steel. Our Grade 5 material meets or exceeds SAE J429 Grade 5 specifications and is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 1 inch is HRC 25-34. Tensile strength on diameters 1/4 to 1 inch will meet a minimum of 120,000 psi.

Grade 5 Carriage Bolts
 
Grade 5 Carriage Bolts
Bolt
Diameter
DiameterHead DiameterHead HeightSquare WidthSquare Depth
Max.Min.Max.MinMaxMinMaxMin.MaxMin.
80.16400.1730.1570.3280.2980.1020.0830.1690.1550.1080.078
100.19000.1990.1820.4690.4360.1140.0940.1990.1850.1250.094
120.21600.2250.2060.5000.4680.1490.1250.2150.1970.1350.105
1/40.25000.2600.2370.5940.5630.1450.1250.2600.2450.1560.125
5/160.31250.3240.2980.7190.6880.1760.1560.3240.3070.1870.156
3/80.37500.3880.3600.8440.7820.2080.1880.3880.3680.2190.188
7/160.43750.4520.4210.9690.9070.2390.2190.4520.4310.2500.219
1/20.50000.5150.4831.0941.0320.2700.2500.5150.4920.2810.250
5/80.62500.6420.6051.3441.2190.3440.3130.6420.6160.3440.313
3/40.75000.7680.7291.5941.4690.4060.3750.7680.7410.4060.375

  • Finished Hex Nut
      
      
     

    Grade 5 Finished Hex Nuts

    SAE J995 Grade 5 
    Click For More
    Grade 5 Finished Hex Nuts are manufactured from medium carbon steel to meet or exceed SAE J429 Grade 5. Material is manufactured with rolled threads. Zinc plated material will meet or exceed ASTM F1941. Typical hardness is HRC 25-34 on diameters of 1/4 to 1 inch, HRC 19-30 on diameters of 1 to 1 1/2 inches. Tensile strength on diameters of 1/4 to 1 inch will meet a minimum of 120,000 psi and 105,000 psi on diameters of 1 to 1 1/2 inches.
  • Flat Washer
      
      
     

    USS Flat Washers

     
    Click For More
    USS pattern flat washers are manufactured from low carbon steel to meet ASTM F844. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153.