Phillips Flat w/ Nibs Self Drilling Cement Board Screws w/ Wings Ruspert Coated

Phillips Flat w/ Nibs Self Drilling Cement Board Screws w/ Wings Ruspert Coated


  • Product Description
  • Related Products
Phillips Flat Cement Board Screw w/ Wings
  
 
List

Phillips Flat w/ Nibs Self Drilling Cement Board Screws w/ Wings Ruspert Coated

  • Meets F.I.P.-1000.7 for torsional strength and drill speed
  • Ceramic coating provides protection from corrosion
  • Wings ream hole in board preventing "jacking action"
  • Nibs under head clamp board firmly

Phillips Flat w/ Nibs Self Drilling Cement Board Screws w/ Wings Ruspert Coated
STRONG-POINT® PHILLIPS FLAT HEAD W/NIBS AND WINGS, RUSPERT COATING
SizePt.Description
8-18 x 1-1/42Phillips Flat Head w/Nibs and Wings, Ruspert Coating
8-18 x 1-5/82Phillips Flat Head w/Nibs and Wings, Ruspert Coating
8-18 x 2-1/42Phillips Flat Head w/Nibs and Wings, Ruspert Coating
 
Application:Attaches fiber board to metal studs.
Drill Capacity (in.): .035 - .100
Specifications:• Meets F.I.P.1-1000.7 for torsional strength and drill speed
• Manufactured to SAE2 J78 for dimensional specifications
• Meets ASTM3 B-117 for salt spray corrosion
Features:• Ruspert coating exceeds 1,000/hr. salt spray resistance
• Ceramic coating provies protection from corrosion
• Wings ream hole in board preventing “jacking action”
• Nibs under head provide flush finish
Installation:A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Use a #2 reduced Phillips Drive bit. Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure.
 
Pullout Values (Avg. Lbs.)
FastenerSteel Gauge
SizePt.2220181614121/83/16
8-1821682273985028881050--------
 
Shear Values (Avg. Lbs.)
FastenerSteel Gauge (Lapped)
SizePt.2220181614121/83/16
8-1825227809371025----------------
 
The values listed are averages achieved under laboratory conditions and imply no warranty. Appropriate safety factors should be applied to these values for design purposes.

1(Fastener Inspection Products)
2(Society of Automotive Engineers)
3(American Society of Testing Materials)