Grade 2 Hex Bolts Zinc

Grade 2 Hex Bolts Zinc


  • Product Description
  • Related Products
hex-bolt.png
  
  
 
List

Grade 2 Hex Bolts Zinc

Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941.
Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.

Grade 2 Hex Bolts Zinc
 
Grade 2 Hex Bolts Zinc
Nominal or
Basic
Diameter
Body DiameterWidth Across FlatsWidth Across
Corners
Head HeightThread Length
For Bolt Lengths
For
Screw
Lengths
≤ 6 in.
For
Screw
Lengths
> 6 in.
 Max.Min.BasicMax.MinMaxMinBasic.MaxMin.Ref.Ref
1/40.25000.25000.24507/160.4380.4280.5050.4885/320.1630.1500.7501.000
5/160.31250.31250.30651/20.5000.4890.5770.55713/640.2110.1950.8751.125
3/80.37500.37500.36909/160.5620.5510.6500.62815/640.2430.2261.0001.250
7/160.43750.43750.43055/80.6250.6120.7220.6989/320.2910.2721.1251.375
1/20.50000.50000.49303/40.7500.7360.8660.8405/160.3230.3021.2501.500
9/160.56250.56250.554513/160.8120.7980.9380.91023/640.3710.3481.3751.625
5/80.62500.62500.617015/160.9380.9221.0831.05125/640.4030.3781.5001.750
3/40.75000.75000.74101-1/81.1251.1001.2991.25415/320.4830.4551.7502.000
7/80.87500.87500.86601-5/161.3121.2851.5161.46535/640.5630.5312.0002.250
11.00001.00000.99001-1/21.5001.4691.7321.67539/640.6270.5912.2502.500
1-1/81.12501.12501.11401-11/161.6881.6311.9491.85911/160.7180.6582.5002.750
1-1/41.25001.25001.23901-7/81.8751.8122.1652.06625/320.8130.7492.7503.000
1-1/21.50001.50001.48802-1/42.2502.1752.5982.4801-5/160.9740.9023.2503.500

  • Finished Hex Nut
      
      
     

    Grade 2 Finished Hex Nuts

    ASTM A563 Grade A 
    Click For More
    Grade 2 Finished Hex Nuts are manufactured from low carbon steel, 1008-1010 for diameters up to 1 inch (cold-formed) and 1045 steel for diameters over 1 inch (hot-formed). Material is manufactured to meet or exceed ASTM A563 Grade A. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A563. Hot-Dip Galvanized nuts are over tapped per ASTM A563. Hardness requirements of HRB 68 - HRC 32 are met or exceeded. Proof load strength of 90,000 psi minimum is met for plain or zinc plated material, 68,000 psi for Hot-Dip Galvanized material.
  • Flat Washer
      
      
     

    USS Flat Washers

     
    Click For More
    USS pattern flat washers are manufactured from low carbon steel to meet ASTM F844. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153.