Grade 5 Hex Cap Screws Zinc

Grade 5 Hex Cap Screws Zinc


  • Product Description
  • Related Products
Grade 5 Hex Bolt
  
  
 
List

Grade 5 Hex Cap Screws Zinc

Grade 5 Hex Cap Screws are manufactured from medium carbon steel. Our Grade 5 material meets or exceeds SAE J429 Grade 5 specifications. All products are manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters 1/4 to 1 inch is HRC 25-34. On diameters over 1 inch to 1 1/2 hardness will range from HRC 19-30. Tensile strength for diameters 1/4 to 1 inch is a minimum of 120,000 psi and for diameters over 1 inch to 1 1/2, 105,000 psi.

Grade 5 Hex Cap Screws Zinc
 
Grade 5 Hex Cap Screws Zinc
Nominal or
Basic
Diameter
Body DiameterWidth Across FlatsWidth Across
Corners
Head HeightThread Length
For Bolt Lengths
For
Screw
Lengths
≤ 6 in.
For
Screw
Lengths
> 6 in.
 Max.Min.BasicMax.MinMaxMinBasic.MaxMin.Ref.Ref
1/40.25000.25000.24507/160.4380.4280.5050.4885/320.1630.1500.7501.000
5/160.31250.31250.30651/20.5000.4890.5770.55713/640.2110.1950.8751.125
3/80.37500.37500.36909/160.5620.5510.6500.62815/640.2430.2261.0001.250
7/160.43750.43750.43055/80.6250.6120.7220.6989/320.2910.2721.1251.375
1/20.50000.50000.49303/40.7500.7360.8660.8405/160.3230.3021.2501.500
9/160.56250.56250.554513/160.8120.7980.9380.91023/640.3710.3481.3751.625
5/80.62500.62500.617015/160.9380.9221.0831.05125/640.4030.3781.5001.750
3/40.75000.75000.74101-1/81.1251.1001.2991.25415/320.4830.4551.7502.000
7/80.87500.87500.86601-5/161.3121.2851.5161.46535/640.5630.5312.0002.250
11.00001.00000.99001-1/21.5001.4691.7321.67539/640.6270.5912.2502.500
1-1/81.12501.12501.11401-11/161.6881.6311.9491.85911/160.7180.6582.5002.750
1-1/41.25001.25001.23901-7/81.8751.8122.1652.06625/320.8130.7492.7503.000
1-1/21.50001.50001.48802-1/42.2502.1752.5982.4801-5/160.9740.9023.2503.500

  • Finished Hex Nut
      
      
     

    Grade 5 Finished Hex Nuts

    SAE J995 Grade 5 
    Click For More
    Grade 5 Finished Hex Nuts are manufactured from medium carbon steel to meet or exceed SAE J429 Grade 5. Material is manufactured with rolled threads. Zinc plated material will meet or exceed ASTM F1941. Typical hardness is HRC 25-34 on diameters of 1/4 to 1 inch, HRC 19-30 on diameters of 1 to 1 1/2 inches. Tensile strength on diameters of 1/4 to 1 inch will meet a minimum of 120,000 psi and 105,000 psi on diameters of 1 to 1 1/2 inches.
  • Flat Washer
      
      
     

    USS Flat Washers

     
    Click For More
    USS pattern flat washers are manufactured from low carbon steel to meet ASTM F844. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153.