Quick Order

Enter Items Below

ITEM#

Grade 5 Hex Tap Bolts Zinc

Grade 5 Hex Tap Bolts Zinc


  • Product Description
  • Related Products
Grade 5 Hex Tap Bolt
  
  
 
List

Grade 5 Hex Tap Bolts Zinc

Grade 5 Hex Tap Bolts are made from AISI 1030-1541 or equivalent medium carbon steel. Commonly used to mount motors to machinery and are also popular in automotive and truck repair. Rockwell C25-C34. Proof load - 85,000 psi. Yield Strength - 92,000 psi. minimum. Tensile Strength - 120,000 psi. minimum.

Grade 5 Hex Tap Bolts Zinc
 
Grade 5 Hex Tap Bolts
Bolt
Diameter
Width Across FlatsWidth Across ComersHead Height
BasicMax.Min.Max.Min.BasicMax.Min.
1/47/160.4380.4280.5050.4885/320.1630.150
5/161/20.5000.4890.577
0.55713/640.2110.195
3/89/160.5620.5510 .6500.62815/640.2430.226
7/165/80.6250.6 120.7220.6989/320.2910.272
1/23/40.7500.7360.8660.8405/160.3230.302
9/1613/160.8 120.7980.9380.91023/640.3710.348
5/815/160.9380.9221.0831.05125/640.4030.378
3/411/81.1251.1001.2991.25415/320.4830.455
7/81 5/161.3 121.2691.5161.44737/640.6040.531
111/21.5001.4501.7321.65343/640.7000.591
11/41 7/81.8751.8 122.1652.06627/320.8760.749

  • Finished Hex Nut
      
      
     

    Grade 5 Finished Hex Nuts

    SAE J995 Grade 5 
    Click For More
    Grade 5 Finished Hex Nuts are manufactured from medium carbon steel to meet or exceed SAE J429 Grade 5. Material is manufactured with rolled threads. Zinc plated material will meet or exceed ASTM F1941. Typical hardness is HRC 25-34 on diameters of 1/4 to 1 inch, HRC 19-30 on diameters of 1 to 1 1/2 inches. Tensile strength on diameters of 1/4 to 1 inch will meet a minimum of 120,000 psi and 105,000 psi on diameters of 1 to 1 1/2 inches.
  • Flat Washer
      
      
     

    USS Flat Washers

     
    Click For More
    USS pattern flat washers are manufactured from low carbon steel to meet ASTM F844. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153.