Quick Order

Enter Items Below

ITEM#

A325 Hex Bolts (By the Piece)

A325 Hex Bolts (By the Piece)


  • Product Description
  • Related Products
A325 Hex Bolt
  
  
  
 
List

A325 Hex Bolts (By the Piece)

Heavy Hex A325 structural bolts are designed for steel to steel structural connections. For this reason, they are typically very short. The A325 and A490 specifications are not intended for general applications, including anchor bolts.

 
 A325 Hex Bolts
Nominal
Size
or Basic
Product
Diameter
Body
Diameter
Width Across
Flats
Width Across
Corners
Head
Height
Thread
Length
Max. Min. Basic Max. Min. Max. Min. Basic Max. Min. Ref.
1/2 0.5000 0.515 0.482 7/8 0.875 0.850 1.010 0.969 5/16 0.323 0.302 1.00
5/8 0.6250 0.642 0.605 1- 1/16 1.062 1.031 1.227 1.175 25/64 0.403 0.378 1.25
3/4 0.7500 0.768 0.729 1- 1/4 1.250 1.212 1.443 1.383 15/32 0.483 0.455 1.38
7/8 0.8750 0.895 0.852 1- 7/16 1.438 1.394 1.660 1.589 35/64 0.563 0.531 1.50
1 1.0000 1.022 0.976 1- 5/8 1.625 1.575 1.876 1.796 39/64 0.627 0.591 1.75
1 1/8 1.1250 1.149 1.098 1- 13/16 1.812 1.756 2.093 2.002 11/16 0.718 0.658 2.00
1 1/4 1.2500 1.277 1.223 2 2.000 1.938 2.309 2.209 25/32 0.813 0.749 2.00
1 3/8 1.3750 1.404 1.345 2- 3/16 2.188 2.119 2.526 2.416 27/32 0.878 0.810 2.25
1 1/2 1.5000 1.531 1.470 2- 3/8 2.375 2.300 2.742 2.622 15/16 0.974 0.902 2.25

  • Heavy Hex Nut
      
      
     

    A194 2H Heavy Hex Nuts

    ASTM A194 Grade 2H 
    Click For More
    A194 2H Heavy Hex Nuts are manufactured from 1045 steel to meet or exceed ASTM A194 Grade 2H. Hot-Dip Galvanized material will meet or exceed ASTM A153 and/or ASTM F2329. Galvanized nuts are over tapped per ASTM A563. Typical hardness is HRC 24-35 for diameters up to 1 1/2 inches, HRB 95 - HRC 35 for diameters over 1 1 1/2 inches. Proof load strength is 175,000 psi.
  • Beveled Washer
      
      
     

    F436 Beveled Washers

    ASTM F436 
    Click For More
    Commonly used when fastening bolts through the flanges of "I" beams, these washers are manufactured from carbon steel and conform to ASTM F436 for hardened steel washers. These washers are suitable for use with fasteners covered in specifications A325, A354, A449 and A490.
  • F436 Flat Washer
      
      
     

    F436 Flat Washers

    ASTM F436 
    Click For More
    F436 flat washers are manufactured from carbon steel to meet or exceed ASTM F436. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153 and/or ASTM F2329. Hardness for plain and zinc plated washers is HRC 38-45 and HRC 26-45 for hot-dip galvanized washers per ASTM F436.
  •