Shopping Cart 0 Items - $0.00
Quick Order

Enter Items Below

ITEM#

Grade 2 Hex Tap Bolts

Grade 2 Hex Tap Bolts


  • Product Description
  • Related Products
  
  
  
 
List

Grade 2 Hex Tap Bolts

A307 or Grade 2 Hex Tap Bolts are manufactured from low carbon steel. Our hex tap bolts meet our exceed ASTM A307 Grade A. All material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Hot-Dip Galvanized material meets or exceeds ASTM A153. Typical hardness will range from HRB 69-100 and tensile strength will meet a minimum 60,000 psi.

 
Grade 2 Hex Tap Bolts
Bolt
Diameter
Width Across FlatsWidth Across ComersHead Height
BasicMax.Min.Max.Min.BasicMax.Min.
1/47/160.4380.4280.5050.4885/320.1630.150
5/161/20.5000.4890.577
0.55713/640.2110.195
3/89/160.5620.5510 .6500.62815/640.2430.226
7/165/80.6250.6 120.7220.6989/320.2910.272
1/23/40.7500.7360.8660.8405/160.3230.302
9/1613/160.8 120.7980.9380.91023/640.3710.348
5/815/160.9380.9221.0831.05125/640.4030.378
3/411/81.1251.1001.2991.25415/320.4830.455
7/81 5/161.3 121.2691.5161.447 37/640.6040.531
111/21.5001.4501.7321.65343/640.7000.591
11/41 7/81.8751.8 122.1652.06627/320.8760.749

  •   
      
     

    Grade 2 Finished Hex Nuts

    ASTM A563 Grade A 
    Click For More
    Grade 2 Finished Hex Nuts are manufactured from low carbon steel, 1008-1010 for diameters up to 1 inch (cold-formed) and 1045 steel for diameters over 1 inch (hot-formed). Material is manufactured to meet or exceed ASTM A563 Grade A. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A563. Hot-Dip Galvanized nuts are over tapped per ASTM A563. Hardness requirements of HRB 68 - HRC 32 are met or exceeded. Proof load strength of 90,000 psi minimum is met for plain or zinc plated material, 68,000 psi for Hot-Dip Galvanized material.
  •   
      
     

    USS Flat Washers

     
    Click For More
    USS pattern flat washers are manufactured from low carbon steel to meet ASTM F844. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153.