Shopping Cart 0 Items - $0.00
Quick Order

Enter Items Below

ITEM#

Simpson Strong-Tie

  • Drop-In Anchor
      
     

    Simpson DROP-IN® Anchors

    DROP-IN® Internally Threaded Expansion Shell Anchors 
    Click For More
    DROP-IN® anchors are internally threaded, deformation controlled expansion anchors with a pre-assembled expander plug, suitable for flush mount applications in solid base materials. The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool.
  • Drop-In Anchor
      
     

    Simpson DROP-IN® Anchors 303 Stainless Steel

    DROP-IN® Internally Threaded Expansion Shell Anchors in 303 Stainless Steel 
    Click For More
    DROP-IN® anchors are internally threaded, deformation controlled expansion anchors with a pre-assembled expander plug, suitable for flush mount applications in solid base materials. The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool.
  • Lipped Drop-In Anchor
      
     

    Simpson Lipped DROP-IN® Anchors

    DROP-IN® Internally Threaded Expansion Shell Anchors 
    Click For More
    DROP-IN® anchors are internally threaded, deformation controlled expansion anchors with a pre-assembled expander plug, suitable for flush mount applications in solid base materials.  The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool.
  • Acorn Sleeve Anchor
      
      
     

    Simpson SLEEVE-ALL® Sleeve Anchors - Acorn

    SLEEVE-ALL® Acorn Sleeve Anchors 
    Click For More
    SLEEVE-ALL® sleeve anchors are pre-assembled expanding sleeve anchors for use in all types of solid base materials.
  • Wedge Anchor
      
      
      
     

    Simpson WEDGE-ALL® Wedge Anchors

    WEDGE-ALL® Wedge Anchors 
    Click For More
    WEDGE-ALL® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied. The threaded stud version is available in eight diameters and multiple lengths. A single size tie-wire version is available for wire supported fixtures. Threaded studs are set by tightening the nut.
  • Nail-In Anchor
      
      
     

    Simpson NAILON™ Zinc Pin Drive Anchors

    NAILON™ Mushroom Pin Drive Anchors - Carbon Steel Pin 
    Click For More
    Zinc NAILON™ anchors are low cost anchors for light-duty applications under static loads. The zinc body consists of a die cast zinc alloy. The carbon steel pin and mushroom head configuration make this anchor tamper resistant.
  • Nail-In Anchor
      
      
     

    Simpson NAILON™ Nylon Pin Drive Anchors

    NAILON Mushroom Pin Drive Anchors - Cold-rolled Steel Pin 
    Click For More
    Nylon NAILON™ anchors are low cost anchors for light-duty applications under static loads. The nylon shell acts as an insulator when used in electrical applications. The cold-rolled steel pin and mushroom head configuration make this anchor tamper resistant.
  • Wedge Anchor
      
      
     

    Simpson WEDGE-ALL® Wedge Anchors 303/304 Stainless Steel

    WEDGE®Wedge Anchors in 303/304 Stainless Steel 
    Click For More
    WEDGE-ALL® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied. The threaded stud version is available in eight diameters and multiple lengths. A single size tie-wire version is available for wire supported fixtures. Threaded studs are set by tightening the nut.
  • Drop-In Anchor Setting Tool
      
     

    Simpson DROP-IN® Anchor Setting Tools

    DROP-IN® Anchor Setting Tools 
    Click For More
    Drop-in anchors are internally-threaded, deformation-controlled expansion anchors with a preassembled expander plug, suitable for flush mount applications in solid base materials. The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool. Drop-in anchors are also available in coil-threaded versions for 1/2 inch and 3/4 inch coil threaded rod. The Lipped Drop-In (DIAL) features a lip at the top of the anchor body that keeps the top of the anchor flush with the concrete. This eliminates the need for precisely drilled hole depths and allows for easier flush installation, consistent embedment and uniform rod lengths. The Short Drop-In Anchor (DIAS) is for use in solid and hollow concrete. The short length enables shallow embedment that helps avoid drilling into rebar or prestressing strands. The wide surface flange allows the DIAS to be installed in deep or bottomless holes.
  • Split Drive Anchor
      
      
      
     

    Simpson Flat Split Drive Anchors

    Flat Split Drive Anchors 
    Click For More
    The Split Drive Anchor is a one-piece anchor with a split-type expansion mechanism on the working end. As the anchor is driven into the hole, the expansion mechanism compresses and exerts force against the walls of the hole. This anchor can be installed in concrete, grout-filled block and stone. Made of heat-treated carbon steel and available in both zinc plated and mechanically galvanized finishes.
  • Split Drive Anchor
      
      
     

    Simpson Mushroom Split Drive Anchors

    Mushroom Split Drive Anchors 
    Click For More
    The Split Drive Anchor is a one-piece anchor with a split-type expansion mechanism on the working end. As the anchor is driven into the hole, the expansion mechanism compresses and exerts force against the walls of the hole. This anchor can be installed in concrete, grout-filled block and stone. Made of heat-treated carbon steel and available in both zinc plated and mechanically galvanized finishes.
  • SLEEVE-ALL® Flat Sleeve Anchor
      
      
     

    Simpson SLEEVE-ALL® Sleeve Anchors - Flat

    SLEEVE-ALL® Flat Sleeve Anchors 
    Click For More
    SLEEVE-ALL® sleeve anchors are pre-assembled expanding sleeve anchors for use in all types of solid base materials.
  • Sleeve Anchor
      
      
     

    Simpson SLEEVE-ALL® Sleeve Anchors - Hex

    SLEEVE-ALL® Hex Sleeve Anchors 
    Click For More
    SLEEVE-ALL® sleeve anchors are pre-assembled expanding sleeve anchors for use in all types of solid base materials.
  • Toggle Bolt
      
      
     

    Simpson Combo Mushroom Spring Wing Toggle Bolts

    Spring Wing Toggle Bolts 
    Click For More
    The Spring Wing Toggle Bolt is designed for installation in hollow wall construction consisting of base materials such as gypsum wallboard and ungrouted concrete masonry units. The Spring Wing Toggle provides a large bearing area to distribute the applied loads. The Spring Wing Toggle Bolt comes complete with Spring Wing Toggle and machine screw (combo phillips and slot head).
  • Wedge Anchor
      
      
     

    STRONG-BOLT® 2 Wedge Anchors Zinc

    STRONG-BOLT® 2 Wedge Anchors for Cracked and Uncracked Concrete 
    Click For More
    Category 1 anchor classification: The Strong-Bolt 2 anchor received classification as a Category 1 anchor, which is established by performance in reliability tests in accordance with AC193 and ACI355.2 test criteria. Category 1 is the highest attainable anchor category for reliability. Tri-segmented clip: Each segment adjusts independently, increasing follow-up expansion should the hole increase in size as a result of a crack. Dual embossments on each clip segment: Enables clip to undercut into the concrete thereby increasing follow-up expansion should a crack occur. The 3/8" anchor solution approved for 3 ¼" concrete thickness: The Strong-Bolt 2 anchor can be installed in cracked concrete with a minimum thickness of 3 ¼", including concrete-over-metal decking. High-strength alloy clip on carbon-steel anchors: This special alloy clip offers improved performance.
    Standard (ANSI) fractional anchor: Fits most fixtures and installs with common drill bit sizes and tools. Type 316 stainless-steel clip on stainless steel anchors: In addition to superior corrosion resistance, a stainless-steel clip offers "memory" that contributes to the anchor's performance if the hole increases in size because of a crack.
  • Wedge Anchor
      
      
     

    STRONG-BOLT® 2 Wedge Anchors 316 Stainless Steel

    STRONG-BOLT® 2 Wedge Anchors for Cracked and Uncracked Concrete, 316 Stainless Steel 
    Click For More
    Category 1 anchor classification: The Strong-Bolt 2 anchor received classification as a Category 1 anchor, which is established by performance in reliability tests in accordance with AC193 and ACI355.2 test criteria. Category 1 is the highest attainable anchor category for reliability. Tri-segmented clip: Each segment adjusts independently, increasing follow-up expansion should the hole increase in size as a result of a crack. Dual embossments on each clip segment: Enables clip to undercut into the concrete thereby increasing follow-up expansion should a crack occur. The 3/8" anchor solution approved for 3 ¼" concrete thickness: The Strong-Bolt 2 anchor can be installed in cracked concrete with a minimum thickness of 3 ¼", including concrete-over-metal decking. High-strength alloy clip on carbon-steel anchors: This special alloy clip offers improved performance.
    Standard (ANSI) fractional anchor: Fits most fixtures and installs with common drill bit sizes and tools. Type 316 stainless-steel clip on stainless steel anchors: In addition to superior corrosion resistance, a stainless-steel clip offers "memory" that contributes to the anchor's performance if the hole increases in size because of a crack.