Shopping Cart 0 Items - $0.00
Quick Order

Enter Items Below

ITEM#

Self Drilling Screws

  •   
      
     

    Phillips Modified Truss Self Drilling Screws K-Lath 410 Stainless Steel

    #8 Diameter, 410 Stainless Steel 
    Click For More
    Fastens corrugated siding panels to steel stud without pre-drilling. #3 drill point for quick penetration of aluminum panels without “point walking”. Securely fastens one to three panel thicknesses. #2 Phillips drive. Drilling thickness capacity: up to 0.142" (118 mils or 10 ga.)
  •   
      
      
     

    Square Bugle Billy Goats™ Self Drilling Screws 410 Stainless Steel

    410 Stainless Steel 
    Click For More
    Fasten wood, plywood and OSB panels to steel studs. #2 square-drive bugle heads drive flush with work surface. Tapping screw threads, #3 drill points. Drilling thickness capacities: up to .083" (68 mils, 14 ga.) for #6, up to .142" (118 mils, 10 ga) for #8 and up to .177" for #10.
  •   
      
      
     

    Square Flat Billy Goats™ Self Drilling Screws w/ Wings 410 Stainless Steel

    410 Stainless Steel, NIBS for Countersinking 
    Click For More
    Fasten wood, plywood and fiber cement to heavier steel – up to .209" thick. #3 square drive. Machine screw thread, threaded full length. 2 1/2 " length for 2 x 4 wood header; 2" length for 1" and 3/4 " boards. Flat countersunk head with self-countersinking nibs. Shank slot enhances thread formation in steel and removes exhaust. Wings above drill point provide clearance hole in work piece so it won’t climb up the shank, then break off as point engages the steel substrate. Drilling thickness capacities: up to .209" (171 mils, 7 ga) for #12, up to .250" (229 mils, 3 ga) for #14.
  •   
      
     

    Square Trim Billy Goats™ Self Drilling Screws 410 Stainless Steel

    #7 Diameter, 410 Stainless Steel 
    Click For More
    Attach wood siding, wood panels and metal trim to steel studs. #1 square drive trim head, .230" head diameter, #3 drill point. Threaded 2/3; of overall length. Drilling thickness capacity: up to 0.125" (111 mils or 11 ga.).
  •   
      
     

    FY-CEM™ Billy Goats™ Self Drilling Cement Board Screws 410 Stainless Steel

    #8 Diameter, #2 Wafer Head, 410 Stainless Steel 
    Click For More
    Fasten fiber cement through furring strips to steel studs. #2 square drive wafer head, #3 drill point. Self-countersinking nibs under head insure seating of screw head flush with work surface. Threaded to within 5/16 " of top of head. Drilling thickness capacity: up to 0.142" (118 mils or 10 ga .).
  •   
     

    Square Pancake Self Drilling Screws 410 Stainless Steel

    #10 x 1 Screw, Low Profile Pancake Head, 410 Stainless Steel 
    Click For More
    #3 drill point for quick penetration of metal up to 0.142" or 10 ga. material thickness. 10 x 1 screw with a #2 square drive. Low profile head. Ideal for securing clips used in standing seam roofing.
  •   
      
      
     

    Hex Washer Head Billy Goats™ Self Drilling Screws 410 Stainless Steel + Marutex

    410 Stainless Steel with Marutex Coating 
    Click For More
    Stainless steel self drillers for the most demanding projects, features the drilling capabilities of 410 stainless steel with increased corrosion resistance. Will withstand over 300 hours of salt spray with no oxidation. Rockwell C-53 typical hardness. Magnetic heat treated and passivated chrome/moly alloy. Indented hex head, tapping screw thread, #3 drill point
  •