Quick Order

Enter Items Below

ITEM#
Results 1-10 of 1112

  • Fender Washer
      
      
     

    Fender Washers 18-8 Stainless Steel

    18% Chromium, 8% Nickel 
    Click For More
    A fender washer, though similar in shape to a standard washer, differs in that the outside diameter is traditionally much larger in proportion to the center hole. With this design, a fender washer can be placed under the head of a bolt or nut to help distribute forces applied when tightening. Its oversized outside diameter also provides more bearing surface for the load of the fastener—distributing the load further on soft or thin materials. Fender washers are commonly used in automotive, sheet metal, plumbing and electrical applications. Stainless Stell 18-8 Provides corrosion resistance.
  • Neoprene Washer
      
     

    Bonded Neoprene Sealing Washers 18-8 Stainless Steel

    18% Chromium, 8% Nickel 
    Click For More
    Where sealing properties are required, the conical design directs the flow of the elastomeric portion toward the problem areas. Where cushioning or vibration presents a problem, our full-face elastomeric material affords 100% protection. Features Include: Quality elastomeric compounding to meet specifications for elasticity, memory, temperature extremes, chemical, ozone, and sunlight-resistance. Conical design directs flow of facing materials to form a seal conforming to both fastener and sealing surface. Full-face design cushions fragile surfaces and minimizes vibration. Typical Dimensions: Metal Thickness is 20 Gauge / ~ 0.030 mils, and rubber thickness is 0.066" nominal. Washer assembly is coined to created a total thickness of 0.120 to 0.140, depending on washer size (before torque is applied). Inside diameter of rubber washer is designed to seal tightly to screw.
  • Flat Washer
      
     

    Flat Washers A2/18-8 Stainless Steel - Metric

     
    Click For More
    Metric flat washers are manufactured with Stainless Steel (A2) material. Corrosion resistant.
  • Finishing Washer
      
     

    Finishing Washers 18-8 Stainless Steel

     
    Click For More
    A formed circular washer designed for use with flat or oval head screws. This is a raised type of finishing washer which is convex in shape. Provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance.
  • Flat Washer
      
     

    Flat Washers 18-8 Stainless Steel

     
    Click For More
    Designed for use with 18-8 stainless steel screws, bolts and nuts in general industrial applications where parts are subject to corrosion.
  • Swaneze Trim Head with Sealing Washers
      
      
     

    Simpson Trim-Head Wood Decking Screws - Square Drive 305 Stainless Steel with EPDM Sealing Washers

    #7 Diameter, 305 Stainless Steel, Type 17 Tip, 302 Stainless Steel Sealing Washer 
    Click For More
    Type-17 point for fast starts. Assemblies provide weathertight seal for use in exterior sheathing and roofing applications. Washers are 302 stainless steel bonded to neoprene and 5/8 " in diameter.
  • Flat Washer
      
     

    Flat Washers 316 Stainless Steel

     
    Click For More
    Designed for use with 316 stainless steel screws, bolts and nuts in general industrial applications where parts are subject to corrosion.
  • Hex Washer Head Twin Lead w/ Washer
      
      
     

    Simpson Metal-Panel Screws - Hex Drive 305 Stainless Steel with EPDM Sealing Washers

    #9 Diameter, Twin Lead Threads, Sharp Point, Neoprene Washer, 18-8 Stainless Steel 
    Click For More
    Fasten aluminum agricultural siding panels to wood joists without pre-drilling • Extra-sharp point for quick penetration of aluminum panels without “point walking” • Twin-lead thread fastens one to three panel thicknesses securely to wood substrate • 5/16 " Hex drive • Panel screws available with and without aluminum/neoprene bonded sealing washers • Fasten aluminum agricultural siding panels to wood joists without pre-drilling • Extra-sharp point for quick penetration of aluminum panels without “point walking” • Twin-lead thread fastens one to three panel thicknesses securely to wood substrate • 5/16 " Hex drive • Panel screws available with and without aluminum/neoprene bonded sealing washers • Fasten aluminum agricultural siding panels to wood joists without pre-drilling • Extra-sharp point for quick penetration of aluminum panels without “point walking” • Twin-lead thread fastens one to three panel thicknesses securely to wood substrate • 5/16 " Hex drive • Panel screws available with and without aluminum/neoprene bonded sealing washers.
  • SAE Flat Washer
      
     

    SAE Flat Washers 18-8 Stainless Steel

     
    Click For More
    SAE Washers are produced to comply with Society of Automotive Engineers specifications. They are of smaller O.D. and thinner gauges than their counterpart bolt sizes of U.S. Standard Washers.
  • Hex Washer Head Twin Lead Screw
      
      
     

    Simpson Metal-Panel Screws - Hex Drive 316 Stainless Steel

    #9 Diameter, Twin Lead Threads, Sharp Point, 316 Stainless Steel 
    Click For More
    Fasten aluminum agricultural siding panels to wood joists without pre-drilling • Extra-sharp point for quick penetration of aluminum panels without “point walking” • Twin-lead thread fastens one to three panel thicknesses securely to wood substrate • 5/16 " Hex drive • Panel screws available with and without aluminum/neoprene bonded sealing washers
Results 1-10 of 1112