Quick Order

Enter Items Below

ITEM#
Results 1-10 of 4112345

  • Phillips Flat Wood Screw
      
      
     

    Phillips Flat Wood Screws 18-8 Stainless Steel

    18% Chromium, 8% Nickel - Flat Head for Countersinking 
    Click For More
    Stainless steel wood screws are tapered along the threaded portion of the shank for optimal holding power in wood. A smooth partial shank or shoulder helps prevent splitting and allows the screw to pull the two pieces of wood together for a tight fitting connection or joint. The stainless steel material is also compatible with ACQ treated lumber.
  • 6-Lobe Trim Swaneze™ Decking Screws
      
      
      
     

    Simpson Trim-Head Deck-Drive™ DWS Wood Screws - 6-Lobe Drive 316 Stainless Steel

    #7 Diameter, 316 Stainless Steel 
    Click For More
    Penetrate the hardest wood products with ease. Unique 4-corner thread form with raised-ridge technology greatly reduces driving torque. 0.230" diameter casing-style head and slender #7 diameter for finish work and trim. 6-lobe drive prevents driver bit cam-out and stripping in recess. Pre-drilling recommended near board ends to prevent splitting. Threaded approximately 2 ⁄ 3 up the shank to tightly draw the decking to the substrate. Choose type 316 stainless steel for superior corrosion resistance. 6-lobe driver bit included in both Contractor Packs and Deck Packs.
  • Square Truss Head Wood Screw T17
      
      
     

    Simpson Truss-Head Wood Screws - Square Drive 305 Stainless Steel

    305 Stainless Steel, Type 17 Tip 
    Click For More
    #2 square drive truss head, coarse thread similar to Swaneze™ screws. Fasten all materials to wood or wood-substitute materials. Pre-drilling recommended – dependent on substrate
  • 6-Lobe Trim Swaneze™ Decking Screws
      
      
      
     

    Simpson Trim-Head Wood Decking Screws - 6-Lobe Drive 305 Stainless Steel

    305 Stainless Steel, Type 17 Tip 
    Click For More
    T-16 6-lobe drive with trim head and a Type 17 tip for faster starts and to resist splitting in hardwoods.  6-lobe drive prevents driver bit cam-out and stripping in recess.  Coarse threads run approximately 2/3 up the shank to draw the decking tightly to the substrate.  Pre-drilling is recommended near board-ends to reduce splitting.  Use only with stable woods and wood substitutes for less noticeable fastening.  Slender #7 shank is designed for finish work and trim.
  • 6-Lobe Woodpeckers™ Decking Screws
      
      
      
     

    Simpson Flat-Head Deck-Drive™ DWS Wood Screws - 6-Lobe Drive 316 Stainless Steel

    316 Stainless Steel with NIBS 
    Click For More
    Penetrate the hardest wood products with ease. Unique 4-corner thread form with raised-ridge technology greatly reduces driving torque. 0.230" diameter casing-style head and slender #7 diameter for finish work and trim. 6-lobe drive prevents driver bit cam-out and stripping in recess. Pre-drilling recommended near board ends to prevent splitting. Threaded approximately 2 ⁄ 3 up the shank to tightly draw the decking to the substrate . Choose type 316 stainless steel for superior corrosion resistance. 6-lobe driver bit included in both Contractor Packs and Deck Packs.
  • Square Bugle Swaneze™ Decking Screws
      
      
      
     

    Simpson Bugle-Head Wood Decking Screws - Square Drive 316 Stainless Steel

    316 Stainless Steel, Type 17 Tip 
    Click For More
    The type 17 tip provides fast starting and resists splitting in hardwood. Coarse threads run approximately 2/3 up the shank to draw the decking tightly to the substrate. Pre-drilling is recommended near board ends to prevent splitting. 316 stainless steel is ideal where superior corrosion resistance is required.
  • 6-Lobe Trim Swaneze™ Decking Screws
      
      
      
     

    Simpson Trim-Head Wood Decking Screws - 6-Lobe Drive 316 Stainless Steel

    316 Stainless Steel, Type 17 Tip 
    Click For More
    T-16 6-lobe drive with trim head and a Type 17 tip for faster starts and to resist splitting in hardwoods. 6-lobe drive prevents driver bit cam-out and stripping in recess. Coarse threads run approximately 2/3 up the shank to draw the decking tightly to the substrate. Pre-drilling is recommended near board-ends to reduce splitting. Use only with stable woods and wood substitutes for less noticeable fastening. Slender #7 shank is designed for finish work and trim. 316 stainless steel is recommended where superior corrosion resistance is needed.
  • 6-Lobe Bugle Swaneze™ Decking Screws
      
      
      
     

    Simpson Bugle-Head Wood Decking Screws - 6-Lobe Drive 316 Stainless Steel

    316 Stainless Steel, Type 17 Tip 
    Click For More
    6-lobe drive prevents driver bit cam-out and stripping in recess. Type 17 tip provides fast starts and prevents splitting in hardwoods. Coarse threads run approximately 2/3 up the shank to help draw the decking tightly to the substrate. Pre-drilling is recommended near board-ends to prevent splitting.  316 stainless steel is ideal where superior corrosion resistance is required. Drive Sizes: #8 - T20, #10 - T25.
  • Square Trim Swaneze™ Decking Screws
      
      
      
     

    Simpson Trim-Head Wood Decking Screws - Square Drive 316 Stainless Steel

    316 Stainless Steel, Type 17 Tip 
    Click For More
    #1 square recess drive and trim head with a Type 17 tip for faster starts and to resist splitting in hardwoods. Coarse threads run approximately 2/3 up the shank to draw the decking tightly to the substrate. Pre-drilling is recommended near board-ends to reduce splitting. Use only with stable woods and wood substitutes for less noticeable fastening. Slender #7 shank is designed for finish work and trim. 316 stainless steel is recommended where superior corrosion resistance is needed.
  • 6-Lobe Woodpeckers™ Decking Screws
      
     

    Simpson Trim-Head Deck-Drive™ DWS Wood Screws - 6-Lobe Drive 305 Stainless Steel

    8 x 2 1/2, 305 Stainless Steel 
    Click For More
    Penetrate the hardest wood products with ease. Unique 4-corner thread form with raised-ridge technology greatly reduces driving torque . 0.260" diameter casing-style head and slender #8 diameter for finish work and trim. 6-lobe drive prevents driver bit cam-out and stripping in recess. Pre-drilling recommended near board ends to prevent splitting. Threaded approximately 2/3  up the shank to tightly draw the decking to the substrate. 6-lobe driver bit included in both Bulk Cartons and Deck Packs.
Results 1-10 of 4112345