Quick Order

Enter Items Below

Results 1-10 of 1912

  • Strong Drive SDWS Timber Screws

    Strong-Drive® SDW EWP-PLY Screw

    Multi-Ply Wood Members, Engineered-Lumber Products and Solid-Sawn Lumber, Black E-Coat 
    Click For More
    The Strong-Drive® SDW EWP-Ply screw is a high-strength structural wood screw specifically designed for fastening multi-ply wood members,
    such as engineered-wood products and solid-sawn lumber. The SDW EWP-Ply installs easily with no pre-drilling and is available in optimized lengths
    for fastening 1 3⁄4" engineered lumber, such as structural composite lumber (SCL). The large, flush head eases the handling of assembled girders and simplifies the installation of finishes or structural connectors.
  • ThruLOK® Screw Bolt Fastening Systems

    ThruLOK® Screw Bolt Fastening Systems

    ThruLOK® Screw Bolt Fastening Systems 
    Click For More
    ThruLOK® is the newest edition to the FastenMaster LOK Line of structural wood-to-wood fasteners. ThruLOK® offers the speed of a LOK Line product and the strength of a through-bolted connection. ThruLOK® is a three-part assembly including a ThruLOK® fastener featuring the patent-pending Paddle Point, engineered washer and LOK-Nut.
  • Terms and Conditions

    Click For More
    [Error processing dynamic tag getCurrentAttribute('item','custitem_text_detailed_description') : record infoitem 24 not found]
  • Bolt Thread Length and Threads per Inch

    Click For More
    [Error processing dynamic tag getCurrentAttribute('item','custitem_text_detailed_description') : record infoitem 19 not found]
  • ASTM and SAE Specifications

    Click For More
    [Error processing dynamic tag getCurrentAttribute('item','custitem_text_detailed_description') : record infoitem 18 not found]
  • Strong Drive SD Connector Screws

    Strong-Drive® SD Connector Screw

    Simpson Strong‑Tie® Connectors, Galvanized 
    Click For More
    The Strong-Drive® SD Connector screw is specifically designed to replace nails in certain Simpson Strong‑Tie connectors, and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong‑Tie products. In certain applications screws are easier and more convenient to install than nails, and the single-fastener load values achieved by the SD screw exceed those of typical 10d common or 16d common nails, respectively. In addition, the galvanized coating makes the SD screw ideal for both interior and most exterior conditions.
  • Wedge Anchor

    STRONG-BOLT® 2 Wedge Anchors 316 Stainless Steel

    STRONG-BOLT® 2 Wedge Anchors for Cracked and Uncracked Concrete, 316 Stainless Steel 
    Click For More
    Category 1 anchor classification: The Strong-Bolt 2 anchor received classification as a Category 1 anchor, which is established by performance in reliability tests in accordance with AC193 and ACI355.2 test criteria. Category 1 is the highest attainable anchor category for reliability. Tri-segmented clip: Each segment adjusts independently, increasing follow-up expansion should the hole increase in size as a result of a crack. Dual embossments on each clip segment: Enables clip to undercut into the concrete thereby increasing follow-up expansion should a crack occur. The 3/8" anchor solution approved for 3 ¼" concrete thickness: The Strong-Bolt 2 anchor can be installed in cracked concrete with a minimum thickness of 3 ¼", including concrete-over-metal decking. High-strength alloy clip on carbon-steel anchors: This special alloy clip offers improved performance.
    Standard (ANSI) fractional anchor: Fits most fixtures and installs with common drill bit sizes and tools. Type 316 stainless-steel clip on stainless steel anchors: In addition to superior corrosion resistance, a stainless-steel clip offers "memory" that contributes to the anchor's performance if the hole increases in size because of a crack.
  • Grade 5 Hex Cap Screw

    Grade 5 Hex Cap Screws Zinc - Domestic USA

    SAE J429 Grade 5, Made in the USA 
    Click For More
    Grade 5 Hex Cap Screws are manufactured in the USA from medium carbon steel. Our Grade 5 material meets or exceeds SAE J429 Grade 5 specifications. All products are manufactured with rolled threads. Typical hardness on diameters 1/4 to 1 inch is HRC 25-34. On diameters over 1 inch to 1 1/2 hardness will range from HRC 19-30. Tensile strength for diameters 1/4 to 1 inch is a minimum of 120,000 psi and for diameters over 1 inch to 1 1/2, 105,000 psi.
  • Phillips Flat Undercut Machine Screw

    Phillips Flat Undercut Machine Screws Black Zinc

    Black Zinc 
    Click For More
    Black Zinc is an acidic, low temperature powdered product developed to impart a black conversion coating of zinc die casting, galvanized stock and electroplated zinc parts. The black coating serves as a base for organic coatings (lacquers, paints, waxes and oils) and also provides an esthetic appeal.
  • 6-Lobe Trim Swaneze™ Decking Screws

    Simpson Trim-Head Deck-Drive™ DWS Wood Screws - 6-Lobe Drive 316 Stainless Steel

    #7 Diameter, 316 Stainless Steel 
    Click For More
    Penetrate the hardest wood products with ease. Unique 4-corner thread form with raised-ridge technology greatly reduces driving torque. 0.230" diameter casing-style head and slender #7 diameter for finish work and trim. 6-lobe drive prevents driver bit cam-out and stripping in recess. Pre-drilling recommended near board ends to prevent splitting. Threaded approximately 2 ⁄ 3 up the shank to tightly draw the decking to the substrate. Choose type 316 stainless steel for superior corrosion resistance. 6-lobe driver bit included in both Contractor Packs and Deck Packs.
Results 1-10 of 1912