1/4 x 1 7/8 Titen HD® Heavy-Duty Screw Anchor Mechanically Galvanized (100)
1103100
- $200 orders ship FREE
- In stock
- Inventory on the way
Drill a hole in the base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to the specified embedment depth plus minimum hole depth overdrill (see table below) to allow the thread tapping dust to settle, and blow it clean using compressed air. (Overhead installations need not be blown clean.) Alternatively, drill the hole deep enough to accommodate embedment depth and the dust from drilling and tapping.
- Head-stamped for easy identification
- Serrated teeth on the tip facilitates cutting and reduces installation torque
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes, hole size equals anchor size
- Specialized heat-treating process creates tip hardness for better cutting without compromising ductility
- Hex washer head requires no separate washer, unless required by code
- Fully and easily removable
- Qualified for exterior applications
- Material
- Carbon steel
Size: 1/4 x 1 7/8 · Packaging: Box of 100
Size: 1/4 x 1 7/8 | Finish: Mechanically galvanized | Packaging: Box of 100 | Weight: 4.2 lb
Orders typically ship within 1 to 3 business days. You can find more information on the status of your order here.
All images accurately represent the product category. However, due to variations in thread patterns, finishes and other variables beyond our control, there may be slight differences from the actual products. Kindly note that these are representative images only.
