3/8 x 1 3/4 Titen HD® Heavy-Duty Screw Anchor Zinc Plated (50)
1103113
| Quantity | Unit Price |
|---|---|
| 1 to 11 | $53.35 |
| 12+ | $50.81 |
- $200 orders ship FREE
- In stock
- Inventory on the way
Drill a hole in the base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to the specified embedment depth plus minimum hole depth overdrill (see table below) to allow the thread tapping dust to settle, and blow it clean using compressed air. (Overhead installations need not be blown clean.) Alternatively, drill the hole deep enough to accommodate embedment depth and the dust from drilling and tapping.
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Use in dry interior environments only
- Material
- Carbon steel
Size: 3/8 x 1 3/4 · Packaging: Box of 50
Size: 3/8 x 1 3/4 | Finish: Zinc plated | Packaging: Box of 50 | Weight: 4.5 lb
Orders typically ship within 1 to 3 business days. You can find more information on the status of your order here.
All images accurately represent the product category. However, due to variations in thread patterns, finishes and other variables beyond our control, there may be slight differences from the actual products. Kindly note that these are representative images only.
